Journal 5/25/2017

1-1
How to load new “MAX_Falcon-8_V2.1_Firmware.bin” to your current Falcon-8?
1) Connect micro USB cable to your Falcon-8 and then plug in the USB cable to your computer.
2) Flip the device over and simply remove jumper from “Jumper 0” and then place onto “jumper 1”.
3) Slowly press the “Reset” button twice.
4) A temporary “CRP DISABLD” drive will display in “My Computer / This PC”
5) Delete the firmware.bin file in your CRP DISABLD drive
6) Copy/paste or drag/drop new “MAX_Falcon-8_V2.1_Firmware.bin” into your CRP DISABLD drive
7) Open your “MAX Falcon-8 V2 Programmer.exe” click load “MAX_Falcon-8_V2.1_Firmware.bin” from CRP DISABLD drive
8) Simply assign the function of each key from the drop down list or set your own macro or key combinations.
8) When satisfied with your settings, click “SAVE”
9) Flip the device over and remove jumper from “Jumper 1” and place it back to “Jumper 0”
10) Lastly, Press the “Reset” button once.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s